SKU: CG02-HD-5M

High Gloss White Vinyl Wrap (CG02-HD)

(2)
Regular price €205,95
Shipping calculated at checkout.

Description

White wraps often look brighter on a swatch than on a vehicle. TeckWrap’s High Gloss White stays neutral, bright, and paint-like instead of drifting blue, yellow, or creamy in light. 

Key Attributes

  • Neutral white tone: clean white with no pearl effect or metallic sparkle, stays true under changing light.
  • Paint-like gloss: polymeric multilayered hybrid film creates the look of freshly detailed OEM paint. 
  • Bubble-free positioning: micro air channels release trapped air as you press the film down, so large sections go on flat. 
  • Installer-friendly film: wraps around mirrors, edges, and moderate recessed areas with heat. 
  • Paint-safe adhesion: transparent Henkel solvent-based acrylic adhesive, weather-resistant, and peels off without leaving residue. 

TeckWrap High Gloss White carries no pearl travel, no metallic sparkle, and no color shift. It’s a clean factory white that stays neutral under changing light rather than shifting to blue, yellow, or gray. The gloss creates the look of freshly detailed OEM paint, not a bright white film laid over the bodywork. Stand it next to a generic aftermarket white, and the difference is immediate. 

OEM Match

  • Closest to BMW Alpine White.
  • Same neutrality as Porsche Grand Prix White.
  • Same brightness as Tesla Pure White.
  • Same saturation as Honda Championship White. 

The best OEM whites rarely rely on pearl or metallic effects. TeckWrap High Gloss White puts the same crisp white on your Supra, Mustang, Corvette, or AMG. 

Features

Film Construction

  • Film Type: Premium polymeric hybrid with air-release channels and Super Gloss HD finish
  • Film Thickness: 0.13 mm
  • Release Liner Thickness: 0.04 mm
  • Backing Liner Thickness: 0.13 mm
  • Total Thickness (with liner): 0.30 mm
  • Liner Thickness: 142 µm plastic (HD high-gloss)
  • Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, viscosity 1000–3000 cps, 12 µm dry
  • Top Layer: PET protective layer (peel before heating)
  • Roll Width: 5 ft (1.52 m)
  • Full Roll Length: 59 ft (18 m)

Performance

  • Service temperature: -35°C to +35°C
  • Release force: 0.18 N/25mm (standard 0.10–0.30)
  • Initial tack: 1015 g/25mm (standard 800–1500, GB31125-2014)
  • Peel strength (180°): 8.1 N/25mm (standard ≥4.9, GB/T2792-1998)
  • Adhesion strength: 70 (standard ≥60, no shifting, GB/T4851-1998)
  • Aging tested: -65°C to +65°C, no residue
  • Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight.

Warranty

  • Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

Application

  • Application temperature: +17°C to +23°C
  • Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 95–100°C (gloss finish)
  • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
  • Overlap: 3–4 mm
  • Non-directional film
  • Avoid overstretching during application
  • Remove the protective cap before installing
  • Aftercare: pH-neutral products only, avoid hot wax or strong solvents

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.


TeckWrap products are warranted to be free of defects in materials for the shelf life period. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
Warranty does not cover normal wear, transportation, labor, or consequential damages.
Screen images may vary; refer to physical color swatches. Use the same production LOT for color consistency. Film must be stored without the protective layer to prevent tunneling. Scratches during application or daily use are not covered.