How To Wrap Taillights
Wrapping your taillights with a tint PPF is one of the simplest upgrades you can make to give your car a bold, smoky look. This step-by-step guide covers everything, from...
Installation Articles
How To Wrap Taillights
-
Vinyl wrapping emblems with leftover film | TeckWrap
You usually have several leftover pieces when wrapping a vehicle with vinyl wrap film. To make the most of these materials, you can use them to wrap up the emblems...
-
Car wrapping: Rocker panel application | TeckWrap
Some rocker panels, like Mercedes’, have a severe 90-degree turn at the corners, which is tricky to wrap with vinyl wrap film. It is easier to wrap this section separately....
-
Precut vinyl: Safe window chrome delete | TeckWrap
Oftentimes, it can be challenging to install chrome delete vinyl on a window molding because it is easy to cut the rubber accidentally. But using a precut piece can significantly...
-
Vinyl wrapping: Customized door handle accent | TeckWrap
There are some door handles with a tiny piece of accent in the middle, which has sharp corners and tight gaps around them. And it is tricky to install a...
-
Chrome vinyl wrap: Take the scratches away | TeckWrap
Being manufactured with multi layers, a chrome vinyl wrap is usually thick. And it is generally unlaminated, or it will be too stiff to apply. Adding the fact that it...
-
Car wrapping: Personalize your window pillars | TeckWrap
There is potential for every area on a vehicle. Even the window pillars between two doors can be personalized with vinyl wrap film. But making direct adjusting and cutting on...
-
Vinyl wrapping AMG bumper (Upper section) | TeckWrap
With a funky grill at the front and being curvy, the front bumper of a Mercedes AMG is challenging to wrap. It is easy to overstretch the vinyl wrap film...
-
Black it out: Roof molding wrapping | TeckWrap
For further customization, some people wrap their cars' roof moldings in a black vinyl wrap film. Those moldings are not giant pieces, but they usually come with curvy corners and...
-
Vinyl wrapping: Inlay or overlay? | TeckWrap
It is common to use inlays and overlays for vinyl film wrapping. When a section is too tricky to handle, and you know that the material might not be able...
-
Quick tips for carbon hood wrapping | TeckWrap
Gloss carbon vinyl wrap film is nothing new, and some people will wrap their entire hood in carbon to create a unique customized look. There is something you should concern...
-
Fix bad rubber molding for vinyl wrapping | TeckWrap
When wrapping an old vehicle with vinyl wrap film, you may come across old rubber moldings, which are flaking off and have lots of dirt behind them. It can...
-
Vinyl wrapping with hardware: Think for the future | TeckWrap
Some installers are used to removing hardware when wrapping a section with vinyl wrap film. For example, they will take off the roof rack so they can wrap the roof...
-
Reinstall hardware after vinyl wrapping with efficiency | TeckWrap
For certain sections of a vehicle, it might be good to remove the hardware if you want to achieve full coverage when wrapping with vinyl film. There might be quite...
