Glänzende, metallisch-silberne „Fern“-Vinylfolie (RB31-HD)

Film Construction

• Film Type: Premium-grade polymeric multilayered hybrid vinyl with air-release channels
• Series: 190 Series
• Film Thickness: 0.14 mm
• Release Liner Thickness: 0.03 mm
• Backing Liner Thickness: 0.14 mm
• Total Thickness (with liner): 0.31 mm
• Release Liner: 142 μm plastic
• Roll Size: 1.52 m × 18 m (59.8" × 708.6")
• Material: Conformable polymeric vinyl with stable color pigments
• Adhesive: Henkel solvent-based acrylic adhesive, transparent and ultra weather resistant, 1000–3000 cps viscosity, 12 μm dry thickness

Performance

• Service temperature: -35°C to +35°C
• Release force: 0.17 N/25mm (standard 0.10 to 0.30)
• Initial tack: 840 g/25mm (standard 800 to 1500)
• Peel strength (180°): 8.7 N/25mm (standard ≥ 6.8)
• Adhesion strength: 70 (standard ≥ 60, no shifting)
• High temperature aging (65°C, 7 days): no adhesive residue
• Low temperature aging (-65°C, 10 days): no adhesive residue

Warranty
Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

• Application temperature: +17°C to +23°C
• Tools: squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
• Conformability: smooth and medium-curved surfaces
• Post-heat: 100°C
• Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
• Overlap: 3–4 mm
• Directional film, check orientation before cutting
• Avoid overstretching during application
• Remove protective cap before install
• Aftercare: pH-neutral products only, avoid waxes and harsh solvents

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of products for their purpose.

TeckWrap products are warranted to be free of defects in material for the period of shelf life. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.

Warranty does not cover normal wear, transportation, labor, or consequential damages.

Screen images may vary, refer to physical color swatches. Use same production LOT for color consistency. Scratches during application or daily use are not covered.