SKU: CG57-HD-5M

غلاف فينيل أزرق زاهي عالي اللمعان (CG57-HD)

(5)
سعر منتظم Dhs. 858.00
شحن محسوبة عند الخروج.

وصف

 

غالبًا ما تفقد درجات اللون الأزرق الزاهية جاذبيتها فتبدو كألوان الباستيل أو وكأنها مصنوعة من البلاستيك. أما لون «الأزرق النابض بالحياة عالي اللمعان» من TeckWrap، فيحافظ على تشبع لونه الكوبالت النقي تحت طبقة نهائية ذات لمعان عميق وسائل.  

الخصائص الرئيسية

  • كثافة الكوبالت النقية: صبغة زرقاء عالية التشبع تحافظ على اللون نقيًا وحيويًا دون أن يميل إلى اللون السماوي أو الفيروزي. 
  • عمق الطلاء الرطب: يخلق الفيلم الهجين متعدد الطبقات البوليمرية انعكاسات واضحة تمنح السطح مظهر الطلاء المصقول حديثًا. 
  • التصاق مقاوم للعوامل الجوية: يثبت لاصق أكريليك شفاف من Henkel يعمل بالمذيبات بقوة رغم تقلبات الطقس. 
  • تركيب أسرع: تعمل قنوات إطلاق الهواء المدمجة على دفع الهواء المحبوس نحو الحواف للمساعدة في تحقيق تشطيب أملس ومستوٍ.  
  • التحكم في الكفاف: يلتف حول المرايا والمنحنيات والحواف والمناطق المقعرة المعتدلة باستخدام الحرارة.
  • إزالة آمنة للطلاء: ينفصل اللاصق بشكل نظيف، تاركًا الطبقة الشفافة الأصلية التي تم تطبيقها في المصنع سليمة دون أي تأثير. 

يتميز اللون الأزرق النابض بالحياة (Vibrant Blue) بلونه المشبع. فهو يتميز بدرجة كوبالت نقية، مما يمنحه مظهرًا رقميًا واضحًا بدلاً من المظهر الباهت. ويبرز التشطيب عالي اللمعان انعكاسات قوية ويضيف عمقًا رطبًا يجعل اللون الأزرق يبدو نابضًا بالحياة من كل زاوية. ضعه بجانب لون أزرق فاتح عادي، وستلاحظ الفرق على الفور. يظل اللون زاهيًا دون أن يميل إلى اللون الأزرق الباستيل الأكثر نعومة. 

تطابق مع لون المصنع

  • الأقرب إلى لون BMW Yas Marina Blue (M3 / M4). 
  • نفس درجة السطوع مثل لون جاكوار ألترا بلو (F-Type).
  • أكثر تشبعًا من لون بورش «شارك بلو» (911 / كايمان).
  • أكثر ثراءً من لون «سوبارو WR بلو بيرل» (WRX STI).

من سيارات الكوبيه الرياضية إلى سيارات الهاتشباك، يضفي اللون الأزرق النابض بالحياة (Vibrant Blue) نفس طاقة لوني "ياس مارينا" و"ألترا بلو" على السيارات التي لم تتوفر لها قط خيار مصنعي بهذه الجرأة.

Features

Film Construction

  • Film Type: Premium polymeric hybrid with air-release channels and Super Gloss HD finish
  • Film Thickness: 0.13 mm
  • Release Liner Thickness: 0.04 mm
  • Backing Liner Thickness: 0.13 mm
  • Total Thickness (with liner): 0.30 mm
  • Liner Thickness: 142 µm plastic (HD high-gloss)
  • Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, viscosity 1000–3000 cps, 12 µm dry
  • Top Layer: PET protective layer (peel before heating)
  • Roll Width: 5 ft (1.52 m)
  • Full Roll Length: 59 ft (18 m)

Performance

  • Service temperature: -35°C to +35°C
  • Release force: 0.18 N/25mm (standard 0.10–0.30)
  • Initial tack: 1015 g/25mm (standard 800–1500, GB31125-2014)
  • Peel strength (180°): 8.1 N/25mm (standard ≥4.9, GB/T2792-1998)
  • Adhesion strength: 70 (standard ≥60, no shifting, GB/T4851-1998)
  • Aging tested: -65°C to +65°C, no residue
  • Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight.

Warranty

  • Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

Application

  • Application temperature: +17°C to +23°C
  • Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 95–100°C (gloss finish)
  • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
  • Overlap: 3–4 mm
  • Non-directional film
  • Avoid overstretching during application
  • Remove the protective cap before installing
  • Aftercare: pH-neutral products only, avoid hot wax or strong solvents

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.


TeckWrap products are warranted to be free of defects in materials for the shelf life period. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
Warranty does not cover normal wear, transportation, labor, or consequential damages.
Screen images may vary; refer to physical color swatches. Use the same production LOT for color consistency. Film must be stored without the protective layer to prevent tunneling. Scratches during application or daily use are not covered.