SKU: CG51-HD-5M

غلاف فينيل أخضر مموه عالي اللمعان (CG51-HD)

(1)
سعر منتظم Dhs. 858.00
شحن محسوبة عند الخروج.

وصف

تبدو بعض الألوان الخضراء اصطناعية فور تركيبها. لكن اللون «Camouflage Green» من TeckWrap ليس كذلك. فطلاءه باللون الزيتوني يتميز بالعمق والغنى اللذين يتسم بهما الطلاء المصنعي الذي تتوقعه في سيارة دفع رباعي أوروبية فاخرة. 

الخصائص الرئيسية

  • عمق دون مظهر طيني: قاعدة زيتونية تكتيكية مع حبيبات معدنية دقيقة تحافظ على لونها في الظل بدلاً من أن تتحول إلى اللون الأسود. 
  • لمعان مصمم هندسيًا: فيلم هجين متعدد الطبقات من البوليمر وأصباغ معدنية تحافظ على نقاء اللمعان دون اللمعان البلاستيكي الذي تتميز به الفينيل الأرخص.
  • تركيب خالٍ من الفقاعات: تعمل قنوات إطلاق الهواء على دفع الهواء المحبوس إلى الخارج أثناء التركيب، بحيث تستقر الألواح بشكل مسطح دون ظهور فقاعات بعد التركيب.
  • ثبات مقاوم للعوامل الجوية: يظل لاصق الأكريليك المذيب من Henkel شفافًا ويحافظ على ثباته في ظل الحرارة والمطر والبرودة دون أن ينفصل من الحواف 
  • فيلم قابل للتكيف مع الحرارة: يلتف حول المرايا والمنحنيات والمصدات والتجاويف المعتدلة بتحكم ثابت. 
  • إزالة آمنة للطلاء: يحمي الطلاء الأصلي عندما يحين وقت تغيير اللون. 

يستمد اللون «Camouflage Green» اسمه من الجيش، ولكنه لا يشبهه في طابعه. فعند استخدامه على السيارة، يبدو أقرب إلى اللون الزيتوني الحصري للسيارات البريطانية السريعة منه إلى طلاء التمويه المخصص للميدان. يتدرج اللون بين الزيتوني الباهت، ولون الطحلب، ولون الغابة، والأخضر الجرافيتي الخافت، اعتمادًا على مكان سقوط الضوء. تحت السحب، تتحول معظم درجات اللون الأخضر الداكن إلى لون موحل أو تقترب من الأسود. أما هذا اللون فيحافظ على هيكله. 

مطابقة لون المصنع

  • الأقرب إلى لون لاند روفر الأخضر الساتاني الغامق (ديفندر / رينج روفر).
  • أكثر نعومة من لون بورش أوك جرين (كايين / ماكان).
  • أعمق من اللون الأخضر "ديستريكت".
  • نفس درجة التشبع مثل لون مرسيدس ديزاينو أوليف ميتاليك.

إذا كانت درجات اللون الأخضر الخافتة التي تأتي بها سيارات لاند روفر أو أودي من المصنع تلفت انتباهك، فإن لون «كاموفلاج جرين» يضفي هذا اللمسة الزيتونية الرصينة على أي سيارة حديثة تقريبًا.

Features

Film Construction

  • Film Type: Premium polymeric hybrid with air-release channels and Super Gloss HD finish
  • Film Thickness: 0.13 mm
  • Release Liner Thickness: 0.04 mm
  • Backing Liner Thickness: 0.13 mm
  • Total Thickness (with liner): 0.30 mm
  • Liner Thickness: 142 µm plastic (HD high-gloss)
  • Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, viscosity 1000–3000 cps, 12 µm dry
  • Top Layer: PET protective layer (peel before heating)
  • Roll Width: 5 ft (1.52 m)
  • Full Roll Length: 59 ft (18 m)

Performance

  • Service temperature: -35°C to +35°C
  • Release force: 0.18 N/25mm (standard 0.10–0.30)
  • Initial tack: 1015 g/25mm (standard 800–1500, GB31125-2014)
  • Peel strength (180°): 8.1 N/25mm (standard ≥4.9, GB/T2792-1998)
  • Adhesion strength: 70 (standard ≥60, no shifting, GB/T4851-1998)
  • Aging tested: -65°C to +65°C, no residue
  • Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight.

Warranty

  • Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

Application

  • Application temperature: +17°C to +23°C
  • Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 95–100°C (gloss finish)
  • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
  • Overlap: 3–4 mm
  • Non-directional film
  • Avoid overstretching during application
  • Remove the protective cap before installing
  • Aftercare: pH-neutral products only, avoid hot wax or strong solvents

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.


TeckWrap products are warranted to be free of defects in materials for the shelf life period. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
Warranty does not cover normal wear, transportation, labor, or consequential damages.
Screen images may vary; refer to physical color swatches. Use the same production LOT for color consistency. Film must be stored without the protective layer to prevent tunneling. Scratches during application or daily use are not covered.