SKU: CG43-HD-18M

غلاف فينيل أصفر لامع بنمط «لوفر» (CG43-HD)

(2)
سعر منتظم Dhs. 2,357.00
شحن محسوبة عند الخروج.

وصف

غالبًا ما يتحول اللون الأصفر الفاتح إلى لون فلوري أو يكتسب مسحة خضراء في ظل الإضاءة المتغيرة. أما لون «Louvre Yellow» من TeckWrap فيحافظ على درجته النقية التي تشبه طلاء الليمون وعلى لمعانه الحاد المرتبط بطلاء السيارات الرياضية الأوروبية.  

الخصائص الرئيسية

  • ثابت تحت أي إضاءة: يحافظ على لون أصفر زاهي بدلاً من الانجراف نحو اللون الأخضر أو الفلوري أثناء الحركة أو مع تغير الإضاءة. 
  • وضوح عالي اللمعان: يُشكّل الفيلم الهجين متعدد الطبقات المصنوع من البوليمر سطحًا أملسًا يشبه الطلاء مع انعكاسات واضحة. 
  • مادة لاصقة يمكن إزالتها دون ترك آثار: مادة لاصقة أكريليكية مذابة بالمذيبات من Henkel يمكن إزالتها دون ترك بقايا وتقاوم المطر والحرارة والتعرض للأشعة فوق البنفسجية.  
  • تركيب خالٍ من الفقاعات: تعمل قنوات إطلاق الهواء على دفع الهواء المحبوس إلى الخارج، مما يساعد الغلاف على الاستقرار بشكل مسطح على الألواح.
  • غشاء قابل للتشكيل بالحرارة: يغلف المرايا والحواف والألواح المقعرة بشكل معتدل دون أن يرتفع عند الزوايا.

يلتقط لون «Louvre Yellow» من TeckWrap مظهر طلاء الليمون المطبق حديثًا بدلاً من اللون الأصفر المفرط التشبع الذي يشيع في سوق قطع الغيار. يحافظ اللمعان على انعكاسات حادة بينما يحتفظ اللون بطابعه النقي والمشرق من زاوية إلى أخرى. تحت السحب أو في الظل، يحتفظ اللون بقاعدة الليمون بدلاً من الانجراف نحو اللون الأخضر. ضعه بجانب لون أصفر فلوري، وستتضح الفروق. يبدو هذا اللون كطلاء المصنع دون أن يبدو قاسياً.   

تطابق مع لون المصنع

  • الأقرب إلى لون Ferrari Giallo Modena (488، F8 Tributo). 
  • نفس درجة التشبع مثل بورش راسينغ يلو.
  • أفتح من لون لامبورغيني جيالو تينيريفي.
  • أكثر إشراقًا من «كورفيت كومبيتيشن يلو». 
  • أكثر رياضية من لون رينو سبورت ليكويد يلو (Mégane RS). 

عادةً ما يقتصر طلاء المصنع من هذا النوع على أشهر طرازات السيارات عالية الأداء. يتيح لون «لوفر يلو» عالي اللمعان من TeckWrap لأي سيارة كوبيه رياضية أو سيدان أو سيارة دفع رباعي أن ترتدي نفس اللمسة النهائية الصفراء الزاهية.

Features

Film construction

  • Film type: Premium polymeric hybrid with air-release channels and Super Gloss HD finish
  • Film thickness: 110 µm
  • Liner thickness: 142 µm plastic (HD high-gloss)
  • Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, viscosity 1000–3000 cps, 12 µm dry
  • Top layer: PET protective layer (peel before heating)
  • Roll width: 5ft (1,52m)
  • Full roll length: 59ft (18 m)

Performance

  • Service temperature: -35°C to +35°C
  • Release force: 0.18 N/25mm (standard 0.10–0.30)
  • Initial tack: 1015 g/25mm (standard 800–1500, GB31125-2014)
  • Peel strength (180°): 8.1 N/25mm (standard ≥4.9, GB/T2792-1998)
  • Adhesion strength: 70 (standard ≥60, no shifting, GB/T4851-1998)
  • Aging tested: -65°C to +65°C, no residue
  • Storage shelf life: 2 years at +10°C to +20°C, 50% RH, dry conditions, away from sunlight.

Warranty

  • Built for long-term outdoor use, up to 3 years outdoor durability on vertical panels and around 2 years across a full wrap, depending on climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.

Application

  • Application temperature: +17°C to +23°C
  • Tools: squeegee with buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer, IR heater
  • Conformability: smooth and medium-curved surfaces
  • Post-heat: 95–100°C (gloss finish)
  • Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
  • Overlap: 3–4 mm
  • Non-directional film
  • Avoid overstretching during application
  • Remove the protective cap before installing
  • Aftercare: pH-neutral products only, avoid hot wax or strong solvents

Disclaimer

All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.


TeckWrap products are warranted to be free of defects in materials for the shelf life period. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
Warranty does not cover normal wear, transportation, labor, or consequential damages.
Screen images may vary; refer to physical color swatches. Use the same production LOT for color consistency. Film must be stored without the protective layer to prevent tunneling. Scratches during application or daily use are not covered.